Most people do not think of an electrician when a light flicker starts, when an outlet stops working, or when a breaker trips for the third time in a week. Those feel like small annoyances, not electrical problems. But they are exactly the calls we take most often, and they are exactly the jobs where a licensed electrician finds something the homeowner or handyman would have missed. Alphin Watts Electric handles electrical work throughout Weymouth, from the quick diagnostic call to the full panel overhaul.
The housing in Weymouth skews older, and older homes carry their own electrical history. Circuits added in different decades, panels that have been patched rather than replaced, wiring that has never been brought up to current code. Property owners and businesses in the area call us when they need that history sorted out properly. We are available every day from 6:30 AM to 10:30 PM, and same-day appointments are often available.
The rate is worked out on the call, before anything is scheduled. You describe the job, and we explain what the work involves and what the quote covers. There is no ambiguity about scope if you ask, and we give you a straight answer about what would change the number.
A few things genuinely do affect price. The age and condition of the existing wiring matters. A job that looks like a simple circuit addition can turn into a panel capacity conversation once we know what is already on the board. If the work requires a permit, that is part of what we talk through before we set an appointment. The price is confirmed before we begin, and the service page carries the full breakdown of what each type of work involves.
Not every electrical job is the same, and the ones that come up most often in a city like Weymouth reflect what the housing stock actually contains. Below are the specific job types we handle regularly.
A panel where half the breakers are unlabelled, mislabelled, or labelled for rooms that no longer exist is a real problem when something goes wrong. We map each circuit to its actual load, label the panel clearly, and note anything that does not match what the wiring diagram should show. It is the kind of work that takes a few hours and saves a lot of confusion later, especially in older homes where circuits have been added over time without documentation.
Running a single extension cord to a detached garage or workshop is a workaround, not a solution. A subpanel fed from the main panel gives a separate structure its own dedicated circuits, sized for the actual loads involved. That means proper lighting, outlets on separate circuits from power tools, and a setup that does not trip a breaker every time two things run at once. We handle the feeder run, the subpanel installation, and the circuit work inside the structure.
Aluminum branch wiring was installed in a significant number of homes built through certain decades, and it is still present in many Weymouth properties. The material itself is not the problem. The connections are. Aluminum expands and contracts differently than the devices and fixtures it connects to, and over time those connections loosen. Loose connections arc. Remediation involves inspecting every connection point, installing listed copalum crimps or replacing the affected runs with copper, and bringing the affected circuits up to current code. We treat your home and its wiring the way we would our own.
Outdoor wiring in New England has to hold up to freeze-thaw cycles, ice, and moisture year after year. We install weatherproof outlets, security and motion-sensor lighting, flood lights, and landscape lighting runs. Every exterior circuit gets proper grounding and bonding, and the conduit or cable type is chosen for the exposure it will face. Wiring work is checked against code before sign-off.
A ceiling fan swap sounds simple until the existing box turns out to be rated for a light fixture only. Fan-rated boxes carry a different load, and installing a fan on the wrong box is a safety issue. We handle the box swap, the wiring, and the fan installation as one job. For rooms that have never had a ceiling fixture at all, we run the circuit and install the box before the fan goes up.
our electrical page explains how the work is handled.
Weymouth is a city with a varied mix of housing and commercial properties, and the electrical calls that come out of it reflect that variety. No two visits are quite the same.
The homes and wiring in this area have their own quirks, and the fault is rarely where it first appears. A dead outlet may have lost a GFCI upstream. A breaker that trips under light load may be failing, or it may be protecting a circuit that has developed a fault in the wiring itself. We run a proper diagnostic before we recommend any repair, and we explain what we found and why the fix we are proposing addresses the actual cause. We'll find the fault and fix it right.
Older panels in this region were sized for a different era of electrical demand. A home that now has an electric dryer, a home office, and an EV charger pulling from a panel that was installed decades ago is asking more of that equipment than it was designed to handle. We assess the existing service, run a load calculation, and size the upgrade to what the building actually needs now and what it is likely to need in the next several years. If the service entrance or meter needs attention as part of that work, we handle it as part of the same project.
Dedicated appliance circuits, GFCI and AFCI protection, whole-home rewiring, EV charger circuits, generator hookups, and electrical safety inspections all fall under this category. The situation that leads to an installation call varies. A homeowner finishing a basement needs circuits for a new living space. A landlord preparing a unit for a new tenant needs GFCI protection brought up to current code. A business adding equipment needs a dedicated circuit sized for the load. The service page carries the full breakdown of what each type of installation involves and what to expect from the visit.
Dealing with a tripping breaker or a dead outlet? Some problems cannot wait for the next available slot a week out. Same-day appointments are often available, and we take calls every day from 6:30 AM to 10:30 PM. When you call, we work out what the job requires and find a time that fits your schedule.
For tenants and businesses that need to stay operational, we plan the work around the hours that cause the least disruption. A business that cannot shut down a circuit during peak hours gets a different scheduling conversation than a homeowner who is home all day. We confirm the appointment window before anyone heads out, and we let you know who is coming and what to expect when they arrive. Prompt response, even for last-minute electrical calls, is part of how we work.
Not every electrical job requires shutting off power to the whole building. Many repairs and installations only need one circuit isolated, and we identify which approach applies before the work begins.
For jobs that do require a broader shutdown, we plan it around whoever is in the building. A Weymouth homeowner working from home needs to know which circuits stay live and for how long. A business trading through a repair needs the same information. We walk through that before we start, not after. You know who to call if you ever need us again.
Not every electrical fault belongs to the homeowner's wiring. Some originate at the utility connection or the service entrance, and working out which side of the meter the problem sits on is part of what we do when the symptoms are ambiguous.
We test from the panel outward and from the service entrance inward. If the fault traces back to the utility's side of the connection, we explain what we found and what the next step is, including what to report to the utility and what documentation helps the process. We do not leave a customer with an unresolved problem and no direction. We keep your home powered and safe.
We cover Weymouth and the communities around it throughout Norfolk County. That includes Braintree, Hingham, Quincy, Holbrook, and Rockland. If the job is across the city line, call and confirm your address and we will let you know what we can do.
Licensed electricians. Code-compliant wiring. Fair rates.
An older panel is worth having inspected before closing or shortly after, because the condition of the wiring, the breaker types, and the service capacity all affect what the home can safely support. We assess the panel, identify anything that needs attention, and explain what the work involves and what it would cost before anything is scheduled. That gives you a clear picture of what you are taking on before you commit to a repair or upgrade plan.
Permit requirements vary depending on the scope of the work and where the installation sits relative to the existing service. We confirm what applies at your address before we schedule, so the inspection process does not catch you off guard after the work is done. The permit conversation happens on the call, not after the job is finished.
Before adding a circuit, an appliance, or any new load, we check the available capacity at the panel, the condition of the service entrance, and whether the existing wiring can support what is being added. Adding load to a system that is already at or near its limit creates problems downstream. We confirm the supply can carry it before any new work begins.
When electrical work is scheduled after walls are already closed or finishes are in place, some of what would have been straightforward becomes a much more involved job. Fishing wire through finished walls takes longer and may require more access points. Involving us before the walls close is always the more efficient approach.
The meter is the dividing line between what the utility owns and what is the property owner's responsibility. We can test the circuits and the panel on the property side to determine whether the fault is there. If everything on our side checks out, the problem is likely with the utility's equipment, and we will point you in the right direction for reporting it.
The framing needs to be complete and the wall cavities open before we can run wire. If conduit is going into a slab or a concrete pour, that needs to be coordinated before the concrete is placed. Getting us involved early in the build schedule prevents the kind of situation where electrical work has to be retrofitted around decisions that were already made.
Yes. Buyers, their agents, and attorneys regularly schedule pre-purchase inspections before a sale closes. We inspect the panel, the wiring, the outlets, and the overall condition of the system and give a clear account of what is in place and what, if anything, needs attention.
The items that come up most often in buyer inspections are ungrounded outlets, missing GFCI protection in kitchens and bathrooms, an undersized or outdated panel, and visible wiring that does not meet current code. Correcting those before listing removes a common negotiating point and gives buyers confidence in the property.
Sparking, a burning smell, a panel that is warm or buzzing, partial power loss across the home, and any wiring that has been physically damaged all warrant a call right away rather than waiting. We take calls every day from 6:30 AM to 10:30 PM. If you are describing something that sounds urgent, tell us that when you call and we will do our best to get someone out the same day.
An inspection report documents what the inspector found, but it does not automatically trigger required repairs unless a permit or a sale is contingent on them. What it does give you is a clear list of what needs attention, in what order of urgency, so you can make informed decisions about what to address and when.
Restoring power at the end of each working day is the goal on multi-day projects. We plan the work so that essential circuits are live overnight wherever possible. If a particular phase of the job requires the main supply to stay off, we let you know in advance so you can plan around it.
Alphin Watts Electric handles electrical work across Weymouth and into Braintree, Hingham, Quincy, Holbrook, and Rockland. Whether the job is a panel upgrade in one town or a rewiring project in the next, the process is the same: call, get a quote, get on the schedule.
Call (857) 626-9359 for a quote on any electrical job in Weymouth or the communities nearby. We are available every day from 6:30 AM to 10:30 PM.
Simple booking. Clear pricing. Safe, solid wiring.
Weymouth's housing stock runs from pre-war triple-deckers to newer commercial builds, and the electrical work each one needs is different. We handle everything from a single outlet replacement to a full service upgrade, and we bring the same attention to code compliance and workmanship to every job. Below is a plain-language look at what we do, who each service fits, and what is worth knowing before you call.
| Service | What's Included | Best For | Things to Know |
|---|---|---|---|
| Ceiling Fan Installation | fan and wiring installationceiling box upgradescircuit load check | rooms where the existing box was never rated for a fan | A standard light fixture box cannot safely support a ceiling fan. We upgrade the box as part of the installation when needed. |
| Electrical Repairs & Troubleshooting | flickering lightsdead outletstripping breakerscircuit diagnostics | homeowners and landlords dealing with an active electrical problem | A symptom like a flickering light or a dead outlet often points to a deeper wiring issue. We diagnose before we repair so the fix addresses the actual cause. |
| Basement & Sump-Pump Circuits | finished basement wiringdedicated sump pump circuitGFCI protection in wet areas | homeowners finishing a basement or adding reliable sump pump power | A sump pump should run on its own dedicated circuit so a tripped breaker elsewhere cannot take it offline during a storm. |
| Backup Generator Installation | transfer switch installationgenerator-to-panel wiringgrounding and bondingpost-installation inspection | homes and businesses that need essential circuits running when the grid goes down | A transfer switch is a code requirement that prevents the generator from back-feeding the utility line. We inspect the completed hookup after installation to confirm everything is operating correctly. |
| Wiring & Circuit Installation | new circuit runshome addition wiringgarage and basement circuitssubpanel installation | renovations, additions, and finished spaces that need circuits wired from scratch | Permit and inspection requirements apply to most new wiring work. We handle that as part of the job. |
| Lighting Installation | recessed lightingpendant and chandelier fixturessecurity and motion lightsweatherproof exterior outlets | interior upgrades and exterior security lighting on single-family and multi-family homes | Exterior lighting circuits require proper grounding and weatherproof materials. All outdoor installations are checked against code before sign-off. |
| Breaker & Fuse Repair | breaker replacementfuse box repairpanel fault diagnosis | homes where a breaker will not reset or a fuse keeps blowing | A breaker that trips repeatedly is signaling an overloaded or faulted circuit. Replacing the breaker without finding the cause does not solve the problem. |
| Electrical Safety Inspections | panel and wiring condition reviewGFCI and AFCI coverage checksmoke and CO detector inspectionpre-sale and rental compliance | home buyers, sellers, landlords, and property managers who need a full system review | We perform inspections for home purchases, pre-sale preparation, rental compliance, and renovation sign-off. Hard-wired smoke and carbon monoxide detectors are part of what we inspect and install where required. |
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgradespanel replacementload calculationsfuse box conversions | homes with older 60- or 100-amp service that can no longer carry modern electrical loads | We run a load calculation before any upgrade to size the panel correctly for existing and planned circuits, including EV chargers and dedicated appliance runs. |
| Outlet & Switch Installation | GFCI outlet upgradesUSB outletsdimmer switchesstandard outlet additions | homeowners, landlords, and property managers keeping units functional and code-compliant | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. Older units often lack it entirely. |
| Knob-and-Tube & Aluminum Rewiring | knob-and-tube identification and replacementaluminum branch circuit remediationwhole-home rewiringcode-correction wiring | pre-1950s Weymouth homes with original wiring or aluminum branch circuits from later renovation eras | Knob-and-tube wiring has no ground and cannot support GFCI or AFCI protection. Aluminum branch wiring loosens at connections over time, which creates a fire risk at outlets and fixtures. |
| Dedicated Appliance Circuits | dryer and range circuitsrefrigerator and dishwasher circuits240-volt runssump pump circuits | kitchens and laundry rooms where appliances share circuits they were never meant to share | A dedicated circuit means one appliance, one circuit. We size the wire and breaker to match the appliance's actual rated draw. |
| EV Charger Installation | Level 2 charger installationdedicated 240-volt circuitpanel capacity checkpermit coordination | EV owners who want reliable home charging without relying on a standard 120-volt outlet | A Level 2 charger requires a dedicated 240-volt circuit and a panel that can carry the added load. We confirm panel capacity before any circuit work starts. |
| Whole-Home Surge Protection | panel-mounted surge deviceprotection from lightning and utility spikesappliance and electronics coverage | homeowners who want to protect electronics, appliances, and wiring from voltage events | A whole-home surge device is installed at the main panel and protects every circuit in the building. It is one of the more straightforward upgrades available for the protection it provides. |
Call (857) 626-9359 to talk through what your home or property needs and get a straight answer on pricing before anything is scheduled.
(857) 626-9359