When a property manager gets a call from a tenant about a dead outlet, or a contractor finishing a unit needs a licensed electrician to sign off before the next walkthrough, the job lands with us. Alphin Watts Electric handles electrical work across Everett for the full range of people who need it: landlords running multi-family buildings, businesses keeping a commercial space functional, and homeowners dealing with wiring that has not been touched since the house was built. We take the call, get the scope clear, and schedule the work.
Everett's housing stock runs dense and old. A city of this size and this age puts real demand on electrical systems that were never designed to carry modern loads. Panels sized for another era, wiring that predates current code, and circuits shared among appliances that each draw more than the original wiring anticipated: these are the calls that come in most often, and they are the ones we know how to handle.
Same-day appointments are often available for both repairs and planned work, depending on the schedule when you call. We are available every day from 6:30 AM to 10:30 PM, including weekends, so a fault that shows up Monday morning does not have to wait until the following week.
When a problem will not keep, we prioritize getting someone out. A sparking outlet, a panel that is warm to the touch, or a breaker that will not stay reset are not situations to leave overnight. Call, describe what you are seeing, and we will tell you what we can do for your address and your timeline.
For tenants and businesses that have to stay open, we work around what the building needs. If keeping part of a circuit live is necessary while another section is being worked on, we plan the job that way. The appointment is confirmed before anyone heads out, so you are not left waiting without information. Prompt response, even for last-minute electrical calls, is part of how we work.
An inspection covers the panel, wiring condition, grounding, GFCI and AFCI coverage, and overall code compliance throughout the building. For a property being purchased, sold, or rented out, an inspection gives a clear picture of what is in place and what needs attention before a transaction closes or a tenant moves in. We document what we find and explain it plainly.
A new appliance, a hot tub, or a workshop setup each needs its own dedicated circuit sized to the load it will carry. We run the circuit from the panel to the endpoint, confirm the panel has capacity to support it, and install the correct outlet or connection. If the panel is at capacity, we address that first. A circuit that is undersized for what feeds it is a problem that surfaces eventually, and we size every run to what the job actually requires. EV charger circuits fall into this category too: a Level 2 home charger runs on a dedicated 240-volt circuit, and we handle the panel check and the full electrical installation.
The electrical side of a generator installation involves a transfer switch, wiring from the generator connection to the panel, and proper grounding and bonding throughout. The transfer switch is a code requirement, not optional: it prevents the generator from back-feeding the utility line. We handle standby and portable generator hookups and inspect the completed system before we leave.
Recessed lighting, pendant fixtures, and LED retrofits are among the more common installation requests we handle. Ceiling fan installation is part of this work too, including upgrading the ceiling box where the existing one is not rated for a fan. For exterior lighting, weatherproof outlets and motion sensor fixtures, we wire the circuit correctly for outdoor exposure and check it against code before sign-off.
Knob-and-tube wiring and aluminum branch wiring are common finds in older New England housing stock, and Everett has plenty of both. Knob-and-tube has no ground and cannot support modern GFCI or AFCI devices. Aluminum branch wiring loosens at connections over time as it expands and contracts with heat cycles. We assess what is in place, explain the scope of what needs to come out, and complete the work in a way that brings the affected circuits up to current code. For whole-home rewiring, we work through the project in stages to keep the building usable during the process. We treat your home and its wiring the way we would our own.
There is more on the electrical services page.
For commercial and light industrial premises, the planning looks different. A retail space, a restaurant, or an office building cannot simply go dark for a day while electrical work is done. We schedule around business hours where possible, and for work that has to happen during off-peak times, we confirm the window in advance so the business can plan around it.
Panel upgrades, subpanel installation, dedicated circuits for commercial equipment, and load calculations for buildings taking on new tenants or new equipment are all part of the commercial work we handle. A load calculation is part of how we approach any job where the existing service may not be sized for what is being added. It tells us what the panel can carry and what, if anything, needs to change before new equipment goes in.
Out-of-hours work is available when the job calls for it. Call and describe the situation, and we will work out a schedule that keeps disruption to a minimum. We keep your home powered and safe, and that applies to a business just as much as a residence.
Getting a quote starts with a phone call. Describe the job, and we give you a rate before anything is scheduled. What the quote covers is explained on the call, so there is nothing to work out after the fact.
What changes a quote is scope. A repair that turns out to involve a deeper wiring fault, or an installation that requires a panel upgrade before the circuit can be run, will affect the price. We talk through any change before the work continues, so there are no decisions made without your input.
We do not charge by square footage or by the age of the building as a flat formula. The rate reflects what the job actually involves: the materials, the circuit run, the panel work, and anything else the diagnostic turns up. Ask what it covers and you get a straight answer.
Simple booking. Clear pricing. Safe, solid wiring.
A fault call starts with a diagnostic. Flickering lights, outlets that stopped working, breakers that trip under normal use: these are symptoms, and the cause is what we are looking for. In older buildings, a symptom in one room can trace back to a connection failure or a wiring fault somewhere else entirely. We run through a proper check before recommending any repair, because replacing parts without finding the source of the problem does not fix it.
A panel that was sized for a lighter era of electrical use is one of the most common reasons for repeated breaker trips and circuits that cannot carry the load being asked of them. We handle 200-amp service upgrades, fuse box conversions, and panel replacements. A load calculation is part of the process, so the replacement is sized for what the building actually needs now and for what is likely to be added. Wiring work is checked against code before sign-off.
Installation work covers the full range: outlets and switches, lighting fixtures, ceiling fans, dedicated appliance circuits, EV charger circuits, and exterior wiring. Each installation is sized and wired correctly for the load it will carry. The service page carries the full breakdown of what we install and how each type of job is handled.
You know who to call if you ever need us again.
We serve Everett and the communities that border it throughout Middlesex County and beyond. Chelsea, Malden, Somerville, Medford, and Revere are all covered. If your address is nearby and you are not sure whether we reach it, call and we will confirm.
Coverage means the same availability, the same scheduling, and the same approach to the work regardless of which city the job is in. A call from Malden gets the same response as a call from Everett. We do not charge differently based on which side of a city line you are on.
Licensed electricians. Code-compliant wiring. Fair rates.
Yes. We work in occupied buildings and coordinate with whoever is present to minimize disruption. For repairs, the tenant or a property manager can be present in place of the owner. For larger projects, we plan the work in a way that keeps the unit usable where possible. Call and describe the situation and we will work out a schedule that fits.
We cover Everett and the surrounding communities including Chelsea, Malden, Somerville, Medford, and Revere. If you manage properties across more than one of those cities, one call handles the scheduling for all of them. Confirm your addresses on the call and we will let you know what we can do for each location.
A panel upgrade sometimes reveals that the service entrance conductors or the meter base are also undersized or deteriorated. When that is the case, we address the full path from the utility connection to the panel so the completed work is safe and code-compliant throughout, not just at the panel itself.
Sparking, a burning smell, a panel that is warm or buzzing, partial power loss across the home, and any wiring that has been physically damaged all warrant a call right away rather than waiting. We take calls every day from 6:30 AM to 10:30 PM. If you are describing something that sounds urgent, tell us that when you call and we will do our best to get someone out the same day.
It often does. Older multi-family and single-family buildings in this area frequently have wiring that predates current code, panels that were sized for lighter loads, and circuits that were never designed for the appliances now running on them. A diagnostic visit tells you what is in place and what, if anything, needs to change. The work required depends on what the inspection finds, not on the age of the building as a number.
Yes. A circuit mapping documents every breaker in the panel, what it feeds, the wire gauge on each run, and whether the circuit has GFCI or AFCI protection. It is useful for older properties where the wiring history is unclear, and it is something landlords and property managers often want before taking on a building.
Moisture finding its way into a connection, a conduit, or a fixture can cause a fault that only shows up when conditions are damp. Outdoor circuits, basement wiring, and any run that passes through an area where water can collect are the usual suspects. We trace the path of the circuit and look for where moisture is getting in.
Minor corrections, such as a missing cover plate, a faulty outlet, or a breaker that needs replacement, can often be handled on the same visit. Larger work, like a panel upgrade or a rewiring project, is scheduled as a separate job once the scope is confirmed. We will let you know on the spot what can be done immediately and what needs a follow-up appointment.
When electrical work is scheduled after walls are already closed or finishes are in place, some of what would have been straightforward becomes a much more involved job. Fishing wire through finished walls takes longer and may require more access points. Involving us before the walls close is always the more efficient approach.
In many cases, yes. A phased rewire lets us work through the home section by section, which can make the project more manageable for occupied properties. We assess the wiring condition and talk through what order makes the most sense based on where the greatest safety concerns are and how the home is being used.
Call us at (857) 626-9359 and describe what happened and when. We want to know if something we worked on is not performing as it should, and we will schedule a return visit to assess the situation. Do not assume a new problem is unrelated to recent work without giving us the chance to check.
A tripping breaker that resets fine, a light that flickers only sometimes, an outlet that mostly works: these are the calls that get delayed because the problem is not constant. They are also the calls that tend to get worse rather than better. Alphin Watts Electric is available every day from 6:30 AM to 10:30 PM. Call (857) 626-9359 for a quote and to get on the schedule. The problem is not going to fix itself, and getting a price costs nothing but the call.
Other towns in range: Malden, Somerville, Medford.
Everett's housing stock runs from pre-war triple-deckers to newer commercial builds, and the electrical work each one needs is different. We handle everything from a single outlet replacement to a full service upgrade, and we bring the same attention to code compliance and workmanship to every job. Below is a plain-language look at what we do, who each service fits, and what is worth knowing before you call.
| Service | What's Included | Best For | Things to Know |
|---|---|---|---|
| Ceiling Fan Installation | fan and wiring installationceiling box upgradescircuit load check | rooms where the existing box was never rated for a fan | A standard light fixture box cannot safely support a ceiling fan. We upgrade the box as part of the installation when needed. |
| Electrical Repairs & Troubleshooting | flickering lightsdead outletstripping breakerscircuit diagnostics | homeowners and landlords dealing with an active electrical problem | A symptom like a flickering light or a dead outlet often points to a deeper wiring issue. We diagnose before we repair so the fix addresses the actual cause. |
| Basement & Sump-Pump Circuits | finished basement wiringdedicated sump pump circuitGFCI protection in wet areas | homeowners finishing a basement or adding reliable sump pump power | A sump pump should run on its own dedicated circuit so a tripped breaker elsewhere cannot take it offline during a storm. |
| Backup Generator Installation | transfer switch installationgenerator-to-panel wiringgrounding and bondingpost-installation inspection | homes and businesses that need essential circuits running when the grid goes down | A transfer switch is a code requirement that prevents the generator from back-feeding the utility line. We inspect the completed hookup after installation to confirm everything is operating correctly. |
| Wiring & Circuit Installation | new circuit runshome addition wiringgarage and basement circuitssubpanel installation | renovations, additions, and finished spaces that need circuits wired from scratch | Permit and inspection requirements apply to most new wiring work. We handle that as part of the job. |
| Lighting Installation | recessed lightingpendant and chandelier fixturessecurity and motion lightsweatherproof exterior outlets | interior upgrades and exterior security lighting on single-family and multi-family homes | Exterior lighting circuits require proper grounding and weatherproof materials. All outdoor installations are checked against code before sign-off. |
| Breaker & Fuse Repair | breaker replacementfuse box repairpanel fault diagnosis | homes where a breaker will not reset or a fuse keeps blowing | A breaker that trips repeatedly is signaling an overloaded or faulted circuit. Replacing the breaker without finding the cause does not solve the problem. |
| Electrical Safety Inspections | panel and wiring condition reviewGFCI and AFCI coverage checksmoke and CO detector inspectionpre-sale and rental compliance | home buyers, sellers, landlords, and property managers who need a full system review | We perform inspections for home purchases, pre-sale preparation, rental compliance, and renovation sign-off. Hard-wired smoke and carbon monoxide detectors are part of what we inspect and install where required. |
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgradespanel replacementload calculationsfuse box conversions | homes with older 60- or 100-amp service that can no longer carry modern electrical loads | We run a load calculation before any upgrade to size the panel correctly for existing and planned circuits, including EV chargers and dedicated appliance runs. |
| Outlet & Switch Installation | GFCI outlet upgradesUSB outletsdimmer switchesstandard outlet additions | homeowners, landlords, and property managers keeping units functional and code-compliant | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. Older units often lack it entirely. |
| Knob-and-Tube & Aluminum Rewiring | knob-and-tube identification and replacementaluminum branch circuit remediationwhole-home rewiringcode-correction wiring | pre-1950s Everett homes with original wiring or aluminum branch circuits from later renovation eras | Knob-and-tube wiring has no ground and cannot support GFCI or AFCI protection. Aluminum branch wiring loosens at connections over time, which creates a fire risk at outlets and fixtures. |
| Dedicated Appliance Circuits | dryer and range circuitsrefrigerator and dishwasher circuits240-volt runssump pump circuits | kitchens and laundry rooms where appliances share circuits they were never meant to share | A dedicated circuit means one appliance, one circuit. We size the wire and breaker to match the appliance's actual rated draw. |
| EV Charger Installation | Level 2 charger installationdedicated 240-volt circuitpanel capacity checkpermit coordination | EV owners who want reliable home charging without relying on a standard 120-volt outlet | A Level 2 charger requires a dedicated 240-volt circuit and a panel that can carry the added load. We confirm panel capacity before any circuit work starts. |
| Whole-Home Surge Protection | panel-mounted surge deviceprotection from lightning and utility spikesappliance and electronics coverage | homeowners who want to protect electronics, appliances, and wiring from voltage events | A whole-home surge device is installed at the main panel and protects every circuit in the building. It is one of the more straightforward upgrades available for the protection it provides. |
Call (857) 626-9359 to talk through what your home or property needs and get a straight answer on pricing before anything is scheduled.
(857) 626-9359